Calor Autogas TomTom POI list

Finding your nearest Calor Autogas refuelling site couldn't be simpler with the TomTom® satellite navigation system. All you need to do is to upload the files below to your TomTom® and no matter where you are in the UK you’ll be able to find your nearest site.

> Download the OV2 data file (approx 17Kb)
> Download the Calor Icon (approx 5Kb)

Installation instructions

• Right click on the above file and select ‘Save Target As...’, choosing a location on your hard drive somewhere that you can easily find.

• Once downloaded, you will first need to unzip the file. To do this, double click on the file to open it using WinZip and drag the OV2 and BMP image file into the folder you wish to store it. If you don't have WinZip installed, you can download a free version from www.winzip.com.

• Connect your TomTom® to the PC using the lead supplied by TomTom®.

• If your TomTom software automatically loads, close it down.

• Use 'My Computer' to navigate to the folder where you saved the OV2 and BMP files. Select both files, right click on them and select 'Copy'.

• From 'My Computer', open the TomTom mass storage device folder (this may look like E:\TomTom, but the drive letter may be different) and double click on the maps directory (this may be 'UK maps', 'Great Britain maps" or 'Western and Central Europe' - it should have other OV2 files there).

• Paste the OV2 and the BMP files by selecting 'Edit > Paste' from the menu.

• Check that the OV2 and BMP files now appear in the folder.

• Choose the option to 'Safely remove hardware' on the bottom right of your screen. Pull the TomTom® lead out of your computer.

• Turn off your TomTom® and then turn it back on again.

• Navigate to the POI section of your TomTom® menu and select the Calor Dealer POI list.

Experiencing problems?

If you experience problems please check the following:

• You have TomTom® Navigator version 1.50 or higher

• You have downloaded the latest utility from TomTom®

• You have sufficient memory for the POI list

• The file(s) are saved in the same directory on your TomTom® where the map data is located

• The TomTom® (re)opened the map after the OV2 file was put there (if necessary, restart TomTom® Navigator)

• In the POI tab of your TomTom® preferences, make sure "Display POI" option is checked, as well as the POI themselves

We welcome feedback on this list, please send any to enquiries@caloronline.co.uk.

Disclaimer

We try to ensure the accuracy of the POI list of Autogas Stations. However, we do not accept any liability for the use made by you of the content. The content of the POI should only be used for information purposes. We strongly advise that if your need is critical you contact the Autogas station, using the telephone number displayed, in advance to confirm that they both supply LPG and are open. We will not be responsible in any circumstances for any loss including wasted expenditure, corruption or destruction of data.